Peg Board Troughs
BROWSE ALL OF OUR PRODUCT CATEGORIES
Stainless Steel Peg Board Troughs are constructed of 18ga. type 304 stainless steel. The rear of the Troughs are turned up 2.5″ while the front and
ends are turned up 1.5″ with hemmed top to provide a smooth edge. Drain is 1″ long 1/2″ diameter stainless steel tube and is welded to bottom left
end of trough. The bottom of the Troughs are kinked to drain to insure proper drainage. All corners are welded and polished to a #4 satin finish. Troughs
can be ordered in any length, so please specify needed length when ordering.
SS = Stainless Steel
PBT = Peg Board Trough
Last Digits = Length of Trough
Example = For a 16″ stainless steel peg board trough use product #SSPBT – 26 while ordering.
Contact us today to get started with your Peg Board Trough order.
