Product Spotlight ~ Stainless Steel Tops
12.04.2023
SFI manufactures custom Stainless Steel Tops to any style, specification, and dimensions to meet our customers’ needs. We offer 14ga. and 16ga. in type 304 or type 316L stainless steel. Standard Laboratory Tops are 4″ high x 1″ thick splash at walls. Tops with sinks have marine edges on fronts and exposed ends, marine edge Tops are 1-1/4″ thick and Tops without marine edges are 1″ thick. Tops have galvanized understructure and sound deadening. All top support channels are enclosed and fastened to top with sound dampening tape. Sinks are built integral in Tops and can be built with 3/4″ radius corners. Sinks have 3-1/2″ diameter die lowered drain openings with bottom of sinks kinked to opening for proper drainage. Tops are available in single piece construction or can be built in multiple pieces with bolted mechanical joints. Tops can also be built in multiple pieces and prepared for field welding. Plywood backed Tops are also available. We build durable, quality Tops to meet the needs of many industries and applications.
-
- ~Hospital Tops
- ~With Sink Cut Outs for drop-in or under-mount sinks
- ~Laboratory Tops
- ~Dished Fume Hood Tops
- ~Residential Tops
- ~L-Shaped Tops
- ~With Integral Sinks
- ~U-Shaped Tops
- ~Without Sinks
- ~With Column Notches
Top Backing/ Understructure | -Galvanized Understructure and Sound Deadening -Stainless Steel Understructure -Plywood Backing |
Edge Style | -Marine Edge -Squared Edge -Raised Rolled Edge -Bull Nose Edge/ Rolled Edge |
Integral Sinks | -Number of Sinks / Sink Bowls -Size of Sinks -Apron Front Sinks / Integral Farmers Sink |
Cut-Outs | -Column Notches -Sink Cut-Outs -Cook Top Cut-Outs -Trash Chutes |
Integral Splashes | -Rear & End Splashes Turned Back then Down -Box Curb Splashes -Enclosed Splashes for Exposed Sides -Partial Splashes -Angled Splashes Turned Back on a 45 Degree Angle then Down |